Outside of printing you may want to manually control some of the functions of your printer. To access these controls, select the "Settings" button and select "Controls".
Extruder Temperature Settings:
To set the temperature of your extruder connect to your printer, select the appropriate entry box and type in the desired value. To disable heating - select the "Off" label. If you select "Preheat" the printer will automatically heat to the PolyMaker material you have selected.
To move your printer manually, select the desired axis and direction. You can adjust the movement increment by selecting the amount at the bottom of the movement controls.
When you press each of the buttons, the axis of your Me2 will move in the following directions.
- To 'home' your printer on all axes, select the "All" button to the right of the home icon. To 'home' a single axis, select the appropriate button to the right of the home icon.
Didn't find what you what you were looking for? Try using our Troubleshooting Tool!