When viewing your printers in the printer list, you will notice that each of them (if you have more than one) will display the current state of that BuildFlow. These statuses tell you what the printer is doing and are useful for troubleshooting purposes.
This BuildFlow is connected to the Internet and connected to a printer. NOTE: this does not necessarily mean the printer is powered on. If you are unable to print with a printer that is displaying a 'Ready' status, check that the printer is switched on and that the power supply is assembled correctly and plugged into a working power socket.
This BuildFlow is connected to the Internet, but disconnected from a printer. You will not be able to print with a disconnected BuildFlow. Double check that the USB cable between the BuildFlow server and printer is connected properly. You may also like to try a different USB slot on the BuildFlow server. The 'System Info' section of the maintenance console will still be available, allowing you to download the logs for that BuildFlow server or reboot it.
This BuildFlow is not connected to the Internet. You may need to check your network settings (network name, password, proxy information etc.) to make sure BuildFlow isn't being denied access and that you have the correct information in the configuration file you generated. If any changes have been made to your network after a BuildFlow has been configured, you may need to re-configure (this includes your network password for DET and enterprise setups).
This BuildFlow is currently updating its software. Whether you started the update or we arranged to remotely update for you, DO NOT remove any cables from the BuildFlow whilst it is updating. Simply wait for it to finish so you can get back to enjoying the latest and greatest that BuildFlow has to offer!
This printer is currently loading or unloading filament. Wait for the process to finish and click on the 'Back' button to get back to the material preset screen.
This BuildFlow is currently analysing the model you selected to print. Your printer will start to respond to commands from the attached BuildFlow server. Once this process starts, you are able to refresh your browser to start another print or exit the page altogether.
This printer is currently printing a model. This status will also display an estimated time remaining for that print and a cancel button. This printer will be unavailable until it finishes printing. NOTE: DO NOT try to print another model before double checking that the bed is clear. Trying to print with something else stuck to the bed will cause failures and may damage your printer.